Filter Replacement Stud Kit
P # 135

Description

This Replacement Filter Stud Kit can be used with the either the 4″ or 6″ See Through Oil Filter Assemblies. This Kit includes
2 – 3/8” x 1.900” long studs, with 2 – 3/8” an washers and 2 – 3/8” 12 point fine thread nuts.

• CVF Part Number:  135
• Fastener Type:  Stud
• Stud Thread Size Base:  Coarse
• Stud Thread Size Top:  Fine
• Fastener Nut Style:  12 Point
• Fastener Material:  8740 and Heat Treated
• Fastener Finish:  Gold Zinc Plated
• Quantity:  Sold as Kit; two Studs, two Washers, and two 12-point Nuts

Notes:  Can be used with all 4” and 6” Clear View Filters.

Description:  The Replacement Stud Kit is for use with all 4” and 6” Clear View Filters. This Kit contains two 3/8” x 1.900” Long Studs, which has fine thread on one end and coarse thread on the other, two AN Washers, and two 3/8” 12-point Fine Thread Nuts. Use Blue or Red Loc Tight on coarse end of stud when installing into the filter base. Use anti-seize in the threads of the 12-point nuts when installing. Should use stud installing tool or can put double nuts on the fine thread end of the stud to remove and install a stud from the filter base. Clear View Filters have four studs that rarely ever go bad when the threads are lubed. Will need to purchase 2 stud kits for an entire replacement set for any filter.

Images & Directions (if available):

Detailed View with Components Explained