Billet Connection Logo Picture

HEMI & 440 BIG BLOCK CHRYSLER ALTERNATOR BRACKET KITS

This Kit is designed for stock style water pump housing without Air Conditioning. This Kit cannot be used with the fuel pump on the block. Must use a fuel pump block off plate and a remote electric fuel pump. Could be used with Power Steering Kit and Double Groove Pulley Kit. 440 engines with a gear drive take a different pulley kit than engines with a timing chain.


All Bracket kits are CNC machined out of 6061 Billet Aluminum. The billet parts are sanded to a 320 Finish and receives either a hand brushed finish for Non Polished kits and a High Luster buffing for our Polished Kits. The billet parts are extensively cleaned and ceramic clear coated for easier maintenance.

Hemi Alternator Bracket Kit Part #3015 & #3315 on Engine

Chrysler Hemi Pictured above is Installed
with Billet Connection's


Billet Alternator Bracket Kit - Part #3015
comes either Polished or Non Polished
440 Chrysler would use Part #3315
comes either Polished or Non Polished
Billet Single Groove Pulley Kit - Part #3515 for Hemi Engines
Billet Single Groove Pulley Kit - Part #3516 for 440 Engines with Gear Drive
Billet Single Groove Pulley Kit - Part #3520 for 440 Engines with Timing Chain
95 AMP Alternator - Part #3550 Polished
95 AMP Alternator - Part #3551 Non Polished
Fan Belt - NAPA Part #25-7417

 

Billet Connection Bracket Kits come with detailed Directions to make Installation easy!

 

Click Here to enlarge Directions Page

Hemi Part #3015 & #3315 Directions Page Link

Part #3015 & #3315 the main Alternator support is made out of 3/4” thick 6061 billet aluminum with its truss design and lightening holes, not only make this an unique and great looking bracket kit, it is also one of the strongest bracket kits on the market. The Alternator Bracket Kit's 4 point mounting system eliminates bracket flex. All the brackets bolts are stainless steel allen head which are counter sunk into the alternator bracket for a flush mount and a cleaner look.


Part #3015 & #3315 - Polished
PRICE $ 229.99


Part #3015 & #3315 - Non Polished PRICE $ 179.99

 

 

Bracket Kits come shrink wrapped with all brackets,
spacers, bolts, nuts, and washers needed to install
as shown below.

Hemi Alternator Bracket Kit Part #3015 & #3315 Completely Packaged

Billet Connection Logo Picture

 

PART #3185 -

HEMI OR BIG BLOCK CHRYSLER

ENGINE ALTERNATOR BRACKET KIT

 

This kit is designed for stock style water pump housing with a 1/4” front motor plate. Also can be used with Power Steering Kit and big block Chrysler double groove pulley kit. Engines with a Gear Drive take a different spacer on the crank pulley than an engines with a Timing Chain. The Bracket Kit comes with both spacers.

Chrysler Hemi Pictured below is Installed
with Billet Connection's

 

Billet Alternator Bracket Kit – Part #3185
Billet Single Groove Pulley Kit – Part #3525
comes either Polished or Non Polished
engines with Gear Drive or Timing Chain, take the same Pulley Kit
95 AMP Alternator – Part #3550 Polished
95 AMP Alternator – Part #3551 Non Polished
Alternator Fan Belt – NAPA Part #7460

Hemi Alternator Bracket Kit Part #3185 on EngineBillet Connection Bracket Kits come with detailed Directions to make Installation easy!

 

Click Here to enlarge Directions Page

Hemi

All bracket kits are cnc machined out of 6061 billet aluminum. The billet parts are sanded to a 320 finish and receives either a hand brushed finish for the Non Polished Kits or a high luster buffing for the Polished Kits.


The billet parts are extensively cleaned and clear ceramic coated for easier maintenance.

 

Part #3185 the main Alternator support is made out of 3/4” thick 6061 billet aluminum with its truss design and lightening holes, not only make this an unique and great looking bracket kit, it is also one of the strongest bracket kits on the market. The Alternator Bracket Kit's 5 point mounting system eliminates bracket flex. All the brackets bolts are stainless steel allen head which are counter sunk into the alternator bracket for a flush mount and a cleaner look.


Part #3185 - Polished
PRICE $ 229.99


Part #3185 - Non Polished

PRICE $ 179.99

 

 

Bracket Kits come shrink wrapped with all brackets,
spacers, bolts, nuts, and washers needed to install
as shown below.

 

Hemi Alternator Bracket Kit Part #3185 Completely Packaged

 

PART #3415 -

HEMI OR BIG BLOCK CHRYSLER

ENGINE LOW MOUNT ALTERNATOR BRACKET KIT

 

This Kit is designed for a CSR billet Electric Water Pump for Supercharged or Non Supercharged engines. We make the Supercharged Idler Bracket to work with this Bracket Kit.

 

Non supercharged engines take a different lower pulley kit than supercharged.

Billet Connection Logo Picture

Part #3415 the main Alternator support is made out of 5/8” thick 6061 billet aluminum with its truss design and lightening holes, not only make this an unique and great looking bracket kit, it is also one of the strongest bracket kits on the market. The Alternator Bracket Kit's 3 point mounting system eliminates bracket flex. All the brackets bolts are stainless steel allen head which are counter sunk into the alternator bracket for a flush mount and a cleaner look.

 

Part #3415 - Polished
PRICE $ 209.99


Part #3415 - Non Polished

PRICE $ 159.99

 

 

Bracket Kits come shrink wrapped with all brackets,
spacers, bolts, nuts, and washers needed to install
as shown below.

 

Hemi Alternator Bracket Kit Part #3415 Completely Packaged

 

Hemi Alternator Bracket Kit Part #3415 on Engine

Chrysler Hemi Pictured above is Installed
with Billet Connection's


Billet Alternator Bracket Kit - Part #3415
comes either Polished or Non Polished
Billet Single Groove Alternator Pulley Kit - Part #3420
comes either Polished or Non Polished
Billet Single Groove Alternator Supercharged Crank Pulley Kit - Part #3425
comes either Polished or Non Polished
Non Supercharged Crank Pulley Kit - Part #3430
comes either Polished or Non Polished
95 AMP Alternator - Part #3550 Polished
95 AMP Alternator - Part #3551 Non Polished
Fan Belt - NAPA Part #7305

 

 

All bracket kits are cnc machined out of 6061 billet aluminum. The billet parts are sanded to a 320 finish and receives either a hand brushed finish for the Non Polished Kits or a high luster buffing for the Polished Kits.


The billet parts are extensively cleaned and clear ceramic coated for easier maintenance.

Thanks For Visiting our Web Site check back often! We are always developing New and Unique Parts & Tools!! Pleae Contact us with any questions or comments @ MIKE@BILLETCONNECTION.COM