All Billet Connection's Block Adapters are machined out of 6061
Billet Aluminum for strength & Clear Anodized for better protection
& easier maintenance. The Block Adapters have high flow designs for high pressure and high volume engine oil systems for today's Performance and all out Race Engines.

BLOCK ADAPTER KITS

 

6" Filter Assembly Picture LinkBillet Connection can build Block Adapters that will screw on in place of any disposable filter that adapts to threaded inlet and outlet openings. We can build and design adapters for different all applications, making it possible for the inlet & outlet openings in a fluid system to adapt to a threaded hose fitting. This will allow easy installation of the See Through Filter Assembly to any fluid system. Click for more information on our See Through Filter Assemblies!

Chevy Block Adatper Picture

PART # 200

CHEVY Block Adapter Kit - PRICE $119.99


Kit comes Shrink Wrapped with the following Included: 1 Billet Block Adapter,
3 Block Adapter Bolts PictureViton® Sealing O-Rings, 2 - 5/16" x 1 5/8" Allen Head Mounting Bolts with Sealing O-Rings (pictured right), and Directions


This Chevy Block Adapter has been redesigned so it will NOT restrict the flow of oil. This is especially important in dry sump and remote filter applications. The new design features a directional block adapter with an arrow on it that points to the front of the engine. The reason for this is so it lines up the outlet opening in the block with the outlet opening of the block adapter for better oil flow. It also allows the inlet opening to have the extra material around the opening to accept the larger fitting without restrictingChevy Block Adapter Picture the flow of oil. It is very important to install the block adapter with the arrow pointing to the front of the engine or the block adapter could restrict the flow of oil.


Most all of the Chevy factory blocks or aftermarket Performance and Racing blocks have 0.600" diameter holes for the oil filter inlet and outlet oil passages. Most of the Chevy block adapters on the market today have 1 /2" pipe thread inlet and outlet openings. The problem with that is the inside diameter of 1/2" pipe fittings are 0.530" in diameter. This means 1/2" pipe fittings WILL restrict the flow of oil even in stock applications let alone in Performance and all out Race Engines. By moving the inlet and outlet openings we were able to put an 1 1/16" - 12 threads per inch in to the threaded openings, which is the same as a #12 straight thread with an o-ring fitting that thread's into the block adapter. Most #12 fittings have a 0.610" diameter hole a little larger than the block oil feed holes.


The Chevy Block Adapters also have two o-rings that create a double seal which seals and stops oil from leaking outside the motor. As pictured below, the single smaller o-ring in the middle seals the inlet opening from the outlet opening.
Scroll Down or Click Here to see Direction Page.
Ford & Dodge Block Adapter Picture

PART # 210

FORD & DODGE Block Adapter Kit
PRICE $119.99

Kit comes Shrink Wrapped with the following Included:
1 Billet Block Adapter, 1 Viton® Sealing O-Ring, and Directions

This Hi Flow Block Adapter was designed for Ford & Dodge applications. The Adapter is made out of 6061 Billet Aluminum and is clear Anodized to for easier maintenance. Adapter screws on where the stock disposable oil filter goes. This Adapter adapts the stock oil filter outlet and inlet oil feed holes to flow through threaded #12 fittings to be able to use a remote oil filter.


The Block Adapter has one Viton® O-Ring which fits into a groove machined into the bottom of the block adapter, to seal against the block when installed.

Ford & Dodge Block Adapter Picture

 

PART # 215

PONTIAC & OLDSMOBILE Block Adapter Kit
PRICE $119.99

Kit comes Shrink Wrapped with the following Included:
1 Billet Block Adapter, 1 Viton® Sealing O-Ring, and Directions

This Hi Flow Block Adapter was designed for Pontiac & Oldsmobile applications. The Adapter is made out of 6061 Billet Aluminum and is clear Anodized to for easier maintenance. Adapter screws on where the stock disposable oil filter goes. This Adapter adapts the stock oil filter outlet and inlet oil feed holes to flow through threaded #12 fittings to be able to use a remote oil filter.


The Block Adapter has one Viton® O-Ring which fits into a groove machined into the bottom of the block adapter, to seal against the block when installed.
Scroll Down or Click Here to see Direction Page.

Pontiac & Olds Adapter Picture

 
STACK PICTURES HERECHEVY FILTER Adapters (OIL COOLER) Pictures

PART # 220

CHEVY FILTER Adapters (OIL COOLER) Kit
PRICE $119.99

Kit comes Shrink Wrapped with the following Included:
1 Billet Block Adapter, 1 Viton® Sealing O-Ring, and Directions

This Hi Flow Block Adapter was designed for applications that run a Chevy Oil Cooler system. The Adapter is made out of 6061 Billet Aluminum and is clear Anodized to for easier maintenance. Adapter screws on where the stock disposable oil filter goes. This Adapter adapts the stock oil filter outlet and inlet oil feed holes to flow through threaded #12 fittings to be able to use a remote oil filter.


The Block Adapter has one Viton® O-Ring which fits into a groove machined into the bottom of the block adapter, to seal against the block when installed.
Scroll Down or Click Here to see Direction Page.
Aluminum Fitting for Block Adapter Picture
ALUMINUM
Steel Fitting for Block Adapter Picture
STEEL
The preferred fittings are #12 straight thread with o-ring (*sometimes called
#12 male o-ring boss fitting,*) on one end and a #12 JIC male on the other end.

Part # 160 - #12 O-Ring Boss to #12 JIC Male Fitting with 1 1/4" Nut; Billet Aluminum - PRICE $9.95 each

Part # 161 - #12 O-Ring Boss to #12 JIC Male Fitting with 1 1/4" Nut; Steel - PRICE $4.95 each

 

Billet Connection offer's replacment Block Adapter O-Rings Kits that seal the adapter against the block. These o-rings are made from Viton® which offers excellent resistance to fuels, chemicals, petroleum products and solvents. Viton® also has a very good high-temperature tolerance up to 300 Degree Fahrenheit.


We offer a replacement O-Ring Kits for all Block Adapter Kits: (Also these O-Rings can be found at most O-Ring dealers)

 

Chevy Block Adapter Kit O-Ring Kit - Part # 205 – Includes three O-Rings: 1 of each Viton® Part #: 223, Part #: 235, and Part #: 238.


Ford & Dodge Block Adapter Kit O-Ring Kit - Part # 215 – Includes one O-Ring: 1 Viton® Part #: 333.

 

MAKE SURE TO CHECK OUT BILLET CONNECTION'S NEW PATENT PENDING SEE THROUGH OIL OR FLUID FILTER ASSEMBLIES!!

 

 

Filter Picture LinkFilter Picture Link


Also make sure to check out Billet Connection's Oil or Fluid Filter Assemblies!! These Filters give the user the ability to keep track of their engine or equipment by being able to visually check the filter element in seconds without draining or leaking any fluid, unbolting or loosening any fasteners or fittings and without the loss of any fluid out of the system.

Directions Page for Block Adapters